lt  | en  | ru 
     
 
About company » Scope of accreditation
 

 

 

     This accreditation scope of company TESTLITA was approved on 21/09/2018 by the Order No. AK-175 of the Director of Lithuanian National Accreditation Bureau under the Ministry of Economy. 


 

                                          JSC „Testlita“                                                    

 

1/3

SCOPE OF ACCREDITATION

 

Flexible

        Applicable and desirable for the entire area of accreditation under the first case of flexibility:

 

 

Test object

Parameter

Test method, chapter, paragraph
(where applicable)

Title of test method

Fresh concrete

Sampling

LST EN 12350-1:2009

Testing fresh concrete - Part 1: Sampling

 

Slump

LST EN 12350-2:2009

Testing fresh concrete - Part 2: Slump-test

 

 

Temperature

 

LST 1428.5:1996

Concrete. Testing methods. Determination of temperature of fresh concrete

Hardened concrete,

Compressive strength of test specimens

LST EN 12390-3:2009 without A.3; A.4; A.5 ch..

LST EN 12390-3:2009/AC:2011

Testing hardened concrete - Part 3: Compressive strength of test specimens

concrete products

Density of hardened concrete

LST EN 12390-7:2009  without  5.5 ch.

Testing hardened concrete - Part 7: Density of hardened concrete

and constructions

Cored specimens.  Taking, testing in compression

 

LST EN 12504-1:2009

 

Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression

 

Concrete testing in structures

LST EN 12504-2:2012

Testing concrete in structures - Part 2: Non-destructive testing - Determination of rebound number

 

Structural timber

 

 

Density

LST EN 408:2010+A1:2012 

7 ch.

Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties

 

 

AS/NZS 4063.1:2010  2.3 p.

Characterization of structural timber – Test method

 

Bending strength and apparent modulus of elasticity

 

AS/NZS 4063.1:2010  2.4 p

Characterization of structural timber – Test method

 

Beam shear strength

AS/NZS 4063.1:2010  2.7 p

Characterization of structural timber – Test method

Protective, repair and finishing

Non-volatile-matter content

 

LST EN ISO 3251:2008

 

Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008)

products and their components

Drying time

 

LST EN ISO 9117-3:2010

Paints and varnishes - Drying tests - Part 3: Surface-drying test using ballotini (ISO 9117-3:2010)

 

 

Resistance to liquids

 

LST EN ISO 2812-1:2018

 

Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water (ISO 2812-1:2017)

 

 

 

LST EN ISO 2812-2:2007

 

Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method (ISO 2812-2:2007

 

 

Bond strength

 

LST EN 1542:2000

Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off

 

 

      

LST EN 13892-8:2003

Methods of test for screed materials - Part 8: Determination of bond strength

 

 

 

ST EN 101L5-12:2016

Methods of test for mortar for masonry - Part 12: Determination of adhesive strength of hardened rendering and plastering mortars on substrates

 

 

Mass of coating

 

LST EN 10346:2015  annex A

Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions

 

 

 

LST EN ISO 1460:2001 

Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area

 

 

 

 

 

2/3

 

Test object

Parameter

Test method, chapter, paragraph
(where applicable)

Title of test method

Protective, repair and finishing products and

 

Volatile organic compound (VOC) content

 

LST EN ISO 11890-1:2008

 

Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007)

their components

 

      

LST EN ISO 11890-2:2013

Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2013)

 

 

Contrast ratio of light-coloured paints at a fixed spreading rate

 

LST EN ISO 6504-3:2007

A method

Paints and varnishes - Determination of hiding power - Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate (ISO 6504-3:2006)

 

 

Water permeability

 

LST EN 1062-3:2008            

Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 3: Determination of liquid water permeability

 

Building materials  (mineral, polymer,

 

 

 

 

Moisture content

 

LST EN ISO 12570:2000

LST EN ISO 12570:2000/A1:2013

LST EN ISO 12570:2000/A2:2018

Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature (ISO 12570:2000)

cement based, etc.

 

AS/NZS 1080.1:2012  4 ch.

Timber-Methods of test-Moisture content-Oven dry method

 

 

LST EN 13183-1:2003

LST EN 13183-1:2003/AC:2004

Moisture content of a piece of sawn timber - Part 1: Determination by oven dry method

 

 

Acid-soluble sulphate content

 

LST EN 1744-1:2009+A1:2013 

12 ch.

Tests for chemical properties of aggregates - Part 1: Chemical analysis. Acid-soluble sulphate content

 

 

Water soluble chloride content

 

LST EN 1744-1:2009+A1:2013 

7 ch.

 

Tests for chemical properties of aggregates - Part 1: Chemical analysis. Water soluble chloride content

 

 

 

LST EN 1015-17:2001

LST EN 1015-17:2001/A1:2004

Methods or test for mortar for masonry - Part 17: Determination of water-soluble chloride content of fresh mortars

 

 

 

LST EN 480-10:2009

Admixtures for concrete, mortar and grout - Test methods - Part 10: Determination of water soluble chloride content

 

Water-soluble chromium (VI) content

 

LST EN 196-10:2016

Methods of testing cement - Part 10: Determination of the water-soluble chromium (VI) content of cement

 

 

Testing place: J. Basanavičiaus g. 160D-2, Šiauliai

 

Test object

Parameter

Test method, chapter, paragraph
(where applicable)

Title of test method

 

Fresh concrete

 

 

 

Sampling

LST EN 12350-1:2009

Testing fresh concrete - Part 1: Sampling

Slump

LST EN 12350-2:2009

Testing fresh concrete - Part 2: Slump-test

Air content

LST EN 12350-7:2009 

5 ch.

Testing fresh concrete - Part 7: Air content - Pressure methods

Slump

LST EN 12350-8:2010

Testing fresh concrete - Part 8: Self-compacting concrete - Slump-flow test

Temperature

LST 1428.5:1996

Concrete. Testing methods. Determination of temperature of fresh concrete

Hardened concrete,

Compressive strength of test specimens

LST EN 12390-3:2009 without A.3; A.4; A.5 ch..

LST EN 12390-3:2009/AC:2011

Testing hardened concrete - Part 3: Compressive strength of test specimens

concrete products,

Density of hardened concrete

LST EN 12390-7:2009  without 

5.5 ch.

Testing hardened concrete - Part 7: Density of hardened concrete

constructions and

Depth of penetration of water

 

LST EN 12390-8:2009

Testing hardened concrete – Part 8: Depth of penetration of water under pressure

their protective products

 

 

 

Water impermeability

 

 

LST EN 14891:2017  A.7

Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, assessment and verification of constancy of performance, classification and marking

 

 

 

 

3/3

 

Test object name

Parameter

Test method, chapter, paragraph
(where applicable)

Description of test method

Hardened concrete,

concrete products,

constructions and

their protective products

Water impermeability

LST 1974:2012 

Annex O

Rules for the Application of LST EN 206-1 and Additional National Requirements

Frost resistance

 

LST 1428.17:2016

Concrete Test methods. Part 17 Determination of frost resistance by volumetric freezing and thawing

Water absorption

LST EN 13369:2013 

Annex G

Common rules for precast concrete products.

Cored specimens.  Taking, testing in compression

 

LST EN 12504-1:2009

 

Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression

Concrete testing in structures

LST EN 12504-2:2012

Testing concrete in structures - Part 2: Non-destructive testing - Determination of rebound number

 

 

 

Concrete articles for tiding surroudings

 

 

 

 

Sampling:

 

paving blocks

 

paving flags

 

kerbs

LST 1551:1999 6.2 ch.,

LST 1551:1999/1K:2001

LST EN 1338:2003 6.2.3 p. Annex B

LST EN 1338:2003/AC:2006

Concrete articles for tiding surroudings. Technical requirements.

Concrete paving blocks - Requirements and test methods

LST EN 1339:2003 6.2.3 p. Annex B LST EN 1339:2003/AC:2006

Concrete paving flags - Requirements and test methods

LST EN 1340:2003 6.2.3 p. Annex B LST EN 1340:2003/AC:2006

Concrete kerb units - Requirements and test methods

Total water absorption

 

LST EN 1338:2003 E priedas

LST EN 1338:2003/AC:2006

Concrete paving blocks - Requirements and test methods. Determination of total water absorption

Reinforcing bars, wire,
welded products, loading
and non-load-bearing welded joints

Sampling

LST EN 10080:2005  8.1.2 p.,

11 ch.

Steel for the reinforcement of concrete - Weldable reinforcing steel - General

Tensile test

LST EN ISO 15630-1:2011  5 ch. without ReH and Rp0,2, 12 ch.

 

LST EN ISO 15630-2:2011 

5 ch. without ReH  and Rp0,2

Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bars, wire rod and wire (ISO 15630-1:2010)

Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric (ISO 15630-2:2010)

 

Bending test

 

LST EN ISO 15630-2:2011 

6 ch.

 

Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric (ISO 15630-2:2010). Bending test

 

 

Shear force

 

LST EN ISO 15630-2:2011 

7 ch.

 

Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric (ISO 15630-2:2010). Shear force test

 

 

 

Additional information about the company's accreditation can be found on the National Accreditation Bureau's  (NAB) page .

 

 

 

 

 


 
  © 2019 testlita.lt | Interneto svetainių kūrimas